Bathroom Sub-Floor
First, place the toilet in the area you want to mount it. Draw an outline of it on the floor. Then look to see that the area is clear of any supports or obstructions under the floor. Then check to see if you have a straight line from the toilet to the black water holding tank.
Drill a pilot hole into the floor and re-check. The toilet requires a minimin of a 3-inch waste pipe. Using a 3-1/2 inch hole saw and a strong drill motor, cut your hole. We found this used toilet at the
local thrift store. Now we will prep for the tile by decking the floor with 1/2 inch hardiboard. This will be glued with PL400 construction adhesive and screwed in place. We are ready for tile.
All the Best, Michael & Christi
See our other Blog;
http://michaelhargisshow.blogspot.com/
Drill a pilot hole into the floor and re-check. The toilet requires a minimin of a 3-inch waste pipe. Using a 3-1/2 inch hole saw and a strong drill motor, cut your hole. We found this used toilet at the 
local thrift store. Now we will prep for the tile by decking the floor with 1/2 inch hardiboard. This will be glued with PL400 construction adhesive and screwed in place. We are ready for tile.
All the Best, Michael & Christi
See our other Blog; http://michaelhargisshow.blogspot.com/
No comments:
Post a Comment