I got a call from the thrift store here in Tombstone that they got in some trailer parts, so off I go. Wow, I found some good stuff. One of the things is a 50amp breaker box with a long pig tail. Score! Now, where do I mount it? I search the MAK board, looked around the inside and outside and settled for the driver side back bay mounted on the rear wall. I attached it to the wall with 1/2-inch self-tapping screws. I will run a ground to the frame when I run and mount the wire.
All the Best, Michael & Christi
Please Comment Below
Cruising a post-Dorian Abacos
1 week ago
WOW! I am so impressed. I had no idea what converting a bus would be like and I still don't understand half of it, but I am impressed.
ReplyDeleteBy the way, On the Road Again is my cell phone ring tone. Except for my three sons, which is The Good Ol' Boys (from the Dukes of Hazzard).
Gypsy (On the Road Again)
Good Going Michael! Don't forget to get a 50 amp surge protector to protect the whole house against spikes and poor pole wiring.
ReplyDelete